Radial Drilling Machine BVR / 325 / GT A
Description
C.K.P. Industries Manufacturer of High Sensitive Radial Drilling Machine BVR / 325 / GT A in Coimbatore, Tamilnadu
Radial Drilling Machine
Model BVR / 325 / GT A (Auto Feed) SPECIFICATION
(All Dimensions are in mm)
|
Drilling Capacity in Steel |
25mm |
|
Tapping Capacity in Steel |
M 16 |
|
Morse Taper in Spindle |
MT 3 |
|
Spindle Traverse |
140 |
|
Pillar Diameter |
160 |
|
No.of Spindle speeds |
10 |
|
Range of Spindle Speed (rpm) |
100 142-210-310-450-600-852-1260-1860-2700 rpm |
|
Pillar front to Spindle center Min / Max |
360/750 |
|
Distance between Base to Spindle Max / Min |
740/305 |
|
Distance between Round Table to Spindle Max / Min |
480/45 |
|
Dia of Round Table |
350 |
|
Square Table specification (H x L x W) |
350 X 390 X 0370 |
|
Base Overall Size |
1180 x 680 |
|
Base working surface |
785/530 |
|
Feeds |
Hand / Auto Feed |
|
No. of Spindle feeds |
3 |
|
Range of Spindle feeds |
0.07-0.15-0.30 mm / Revolution |
|
Power of Spindle drive motor |
1.5 Kw /2HP 1440 rpm 415 Volt Ac3 Phase, 50 Hz |
|
Power of Lifting motor |
0.75Kw /1HP- 1640 rpm - 415 Volt Ac3 Phase, 50 Hz |
|
Space Occupied (LxWxH) |
1300 x 800 x 1760 mm |
|
Weight |
850 Kg with Round Table / 875 Kg with Square Table |
OPTIONAL ACCESSORIES
* Drill Chuck with Arbor & Key
* Coolant Pump
* Light Fittings
* Reduction Sleeves
* Machine Vice
* D.O.L. Starter
* Square Table
NOTE:
The Machine also be supplied with the following Speeds on Customers request
at extra cost.
BY FIXING 1HP 960 RPM MOTOR - ~ 65-95-140-205-300 / 390-570-840-1230-1800 rpm
BY FIXING 1HP 720 / 1440 RPM Dual Speed Motor - 50-71-105-155-225 / 300-426-630 930-1350 rpm
- 100-142-210-310-450 / 600-852 - 1260- 1440-1860-2700 rpm
NOTE : The above specifications are approximate only. Due to constant improvement, design the specification are subject to change without notice.